Checking The Code Setting; Checking The Ambient Temperature - EKF Diagnostics SensLab Lactate Scout Vet Instruction Manual

2.3 Checking the code setting

The code is displayed briefly when you switch
measuring mode on
tests are performed with the same code, a
reminder to check the code will be displayed
for three seconds
8
within three seconds will take you to the code
configuration menu.
7
. If more than 24
7
. Pressing the OK button
8

2.4 Checking the ambient temperature

To ensure consistent results are achieved
under different climatic conditions, the
measuring device is equipped with a
temperature sensor. The temperature sensor
is located underneath the opening for the
Test Strips .
9
9
WARNING
Do not touch or cover the temperature sensor
with your hand. Failure to do so may result
in the risk that the temperature sensor will
read the ambient temperature incorrectly and
report incorrect test results.
16