Performing A Test; Preparing For A Test - EKF Diagnostics SensLab Lactate Scout Vet Instruction Manual

2 Performing a test

2.1 Preparing for a test

Remove a Test Strip from the container.
Make sure you do not touch the opening for
the blood sample
removed the Test Strip, insert it into the
measuring device opening in the direction of
the arrow until you can feel resistance.
The contacts must be facing up.
1
2
13
. As soon as you have
1
The display will briefly show the current code
setting. A blinking drop symbol and an animal
icon will then be displayed. Use the arrow
keys to change the animal icon to the species
desired. The ambient temperature of the
measuring device will be displayed beneath
the info line
.
2
ATTENTION
Before you use a Test Strip from a new Test Strip
container, you must check that the code on the
label is the same as the code currently configured
in the device. If the code does not match, then it
must be reconfigured (see section 1.6).
.
3
3