To Re-Install The Front Grille; To Remove The Electrical Wiring Box Cover; To Open The Service Cover - Daikin ATXF35D Installer's Reference Manual

6.2.4 To re-install the front grille

6.2.5 To remove the electrical wiring box cover

6.2.6 To open the service cover

FTXF20~42D5V1B + ATXF20~42D5V1B
Daikin room air conditioner
4P519439-16R – 2021.12
1 Install the front grille and firmly engage the 3 upper hooks.
2 Install 2 screws back on the front grille.
3 Install the air filter and then mount the front panel.
1 Remove the front grille.
2 Remove 1 screw from the electrical wiring box.
3 Open the electrical wiring box cover by pulling the protruding part on the top
of the cover.
4 Unhook the tab on the bottom and remove the electrical wiring box cover.
a
b
a
c
a Tab
b Protruding part on the top of the cover
c Screw
1 Remove 1 screw from the service cover.
2 Pull out the service cover horizontally away from the unit.
a Service cover screw
a b
6 Unit installation
|
3
a
Installer reference guide
27