MP132-42
GS650F
XI. Troubleshooting
Text
Troubleshooting
The table shows potential failures, their possible cause and removal options. How-
ever, if you are unable to remove the problem, contact a professional to assist you.
m CAUTION!
Always switch off the engine and pull the ignition cable before starting any inspection
or adjustment work.
m CAUTION!
If, after making an adjustment or repair to the engine, you let it run for a few minutes,
remember that the exhaust and other parts will get hot. Thus, do not touch parts that
emanate heat, as these may burn you.
Fault
Loud while
running, machine
vibrates heavily
Engine does not
start
Engine runs
unsteadily
Uneven mowing
results
Unsatisfactory
bagging of the
grass
AFTER SALES SUPPORT
1300 855 831
Possible cause
• Screws are loose
• Blade fasteners are loose
• Blade is unbalanced
• Brake lever not pressed
• Speed lever in wrong
position
• Spark plug is defective
• Fuel tank is empty
• Contaminated fuel
• Cold environment
• Engine faulty
• Air filter is soiled
• Spark plug is soiled
• Blade is blunt
• Cutting height is too low
• Cutting height is too low
• Blade is worn
• Catcher is clogged
MODEL: MP132-42 PRODUCT CODE: 704437 01/2021
Troubleshooting
Remedy
• Check screws
• Check blade fasteners
• Replace blade
• Press brake lever
• Check setting
• Replace spark plug
• Refill with fuel
• Empty fuel tank and fill with
clean fuel
• Push the primer button
• Contact authorised customer
service
• Clean the air filter
• Clean the spark plug
• Sharpen the blade
• Set correct height
• Set correct height
• Replace the blade
• Empty the catcher
support@scheppach.com.au
AUS
AUS
<Chapter>
31