ALDI FERREX 132cc User Manual page 23

AUS
MP132-42 Maintenance and cleaning
or petroleum ether.
Wheel axles and wheel hubs
• These should be lightly greased once a season.
Blade
For safety reasons you should only ever have your blade sharpened, balanced and
mounted by an authorized service workshop. For optimum results it is recommended
that the blade should be inspected once a year.
Changing the blade (Fig.17)
Only ever use original spare parts when having the blade replaced.
Wear gloves when replacing the blade in order to prevent injury.
Never have any other blade fitted.
• Empty the fuel tank before removing the blade
• To replace the blade, undo the screw.
• Reinstall as illustrated in Fig. 17. Tighten the screw properly. Tightening torque 45
Nm. When replacing the blade, the blade screw should also be replaced.
Damaged blades
Should the blade, in spite of all precautions, come into contact with an obstruction,
shut down the engine immediately and pull the spark plug boot. Tip the lawn mower
onto its side and check the blade for damage. Damaged or bent blades must be
replaced. Never attempt to bend a bent blade back to straight again. Never mow the
lawn with a bent or heavily worn blade as this will cause vibrations and can lead to
further damage to the lawn mower.
m CAUTION! There is a risk of injury if you work with a damaged blade.
Resharpening the blade
The blades can be resharpened with a metal file. In order to avoid imbalance, the
blade should be resharpened by an authorized service workshop
Checking the oil level
m CAUTION! Never run the engine with no or too little oil. This could cause severe
damage to the engine. Use only SAE30 engine oil.
AFTER SALES SUPPORT
27
1300 855 831  support@scheppach.com.au

MODEL: MP132-42 PRODUCT CODE: 704437 01/2021