Troubleshooting - ALDI FERREX 161CC User Manual

4 Stroke Petrol Lawn Mower

Troubleshooting

Problem
Engine does
not start.
Cutting / Engine
performance
decreases.
Hard catcher is
not filling up to opti-
mum level.
Engine will not stop.
(DO NOT Panic)
For all other issues, please contact Customer Service on 1300 889 028
or email info.aldi@positecgroup.com
AFTER SALES SUPPORT
1300 889 028
1800 909 909
(toll free)
Possible Cause
Fuel tank (14) is empty.
Oil tank is empty.
Spark plug (24).
Blade hitting the grass to be cut.
Old fuel in tank or bowl.
Variable speed throttle control
(2) not turned on.
Cutting height.
Bar blade (26) is dull or blunt.
Hard catcher (7) is full .
Cutting height too low.
Grass is wet.
Bar blade (26) is dull or blunt.
Variable speed throttle control
(2) not turned off.
Check the fuel tank (14), and refuel if
required.
Check the level of the oil dipstick (17),
and if low or empty, add oil.
Clean or replace if dirty or worn.
Increase the cutting height of the mower
so the blades do not make contact with
the grass on start up.
FULLY drain the fuel from the fuel tank (14)
via the drain in the bowl of the carburettor.
Even if there is no fuel in the fuel tank (14),
drain all old fuel out of the bowl.
Refer page 21.
Check the variable speed throttle control
(2) is fully pressed downwards to the
engine.
Increase the cutting height using the
height adjustment lever (28).
Replace the bar blade (26) with new / sharp
blade.
NOTE: Always ensure the engine is turned
off before undertaking this task.
Empty hard catcher (7).
Increase the cutting height using the
8 height adjustment lever (28).
Allow the grass to dry before mowing.
Sharpen or replace bar blade (26).
Fully turn the variable speed throttle
control (2) upwards to the upper handle
bar (1).Pump the priming bulb (22) 5 or 6
times quickly.
Remove spark plug cover.
Allow motor to continue to run until fuel
all used. Do NOT leave the mower
unattended.
info.aldi@positecgroup.com
e-mail: help@powertoolsupport.com
MODEL: №. DM46P-DO160 • 09/2018 • 60751
Troubleshooting
Solution
10/2019 10852
37