Troubleshooting; Storage - ALDI FERREX XSZ46I User Manual

GB IE

Troubleshooting

Troubleshooting
Fault Possible cause
Screws are loose
Blade fasteners are
Heavy vibration
loose
when running
Blade is un-
balanced
Start/stop bar not
pressed
Spark plug is defec-
tive
Engine does not
Fuel tank is empty
start
Engine may be
flooded
Forgot to press the
primer
Air filter is soiled
The scarifying
results are inconsis-
Spark plug is soiled
tent.
Blade is blunt
Uneven mowing
Cutting height is too
results
low
Cutting height is too
low
Unsatisfactory bag-
Blade is worn
ging of the grass
Collection box is
clogged
46CM Petrol Lawnmower
Troubleshooting
Check screws
Check blade
fasteners
Replace blade.
Press start/stop bar
Replace spark plug
Adjust the
scarifying depth.
Remove plug and
dry
Press the primer for
3-5 times.
Clean the air filter
Clean the spark
plug
Sharpen the blade
Set correct height
Set correct height
Replace the blade
Empty the grass
bag
31
46CM Petrol Lawnmower

STORAGE

Storing the Lawnmower for Short Periods
The lawnmower can be stored for short periods of time (less
than 15 days) without performing any storage maintenance.
Before placing the lawnmower into storage always carry out the
following:
• Allow the engine to fully cool.
• Ensure the Collection box is empty.
• Clean all debris from under the mower deck.
• Store the lawnmower on a flat and level surface with all 4
wheels on the ground upright.
• Store in a safe place which is not accessible by children or
people who are not familiar with operation.
WARNING!
Do not empty the petrol tank in enclosed areas, near fire or
when smoking. Petrol fumes can cause explosions and fire.
Storing the Lawnmower for Extended Periods
If the lawnmower is to be place into storage for longer periods
of time, storage maintenance must be performed on the
lawnmower.
If the following steps are not carried out, when you next operate
the lawnmower it may not start correctly and may need to be
serviced.
32
GB IE
Storage