Before First Use - ALDI FERREX 132cc User Manual

MP132-42 GS650F
VII. Before first use
Text
Before starting the equipment
Assembling the components
Some parts of the mower come disassembled. For quick and easy assembly, read
and follow the instructions below.
Important! You will need the following additional tools (not supplied) for assembly, and
also for maintenance work:
• A 1 litre measuring jug (oil/petrol resistant)
• A petrol can (5 litres is sufficient for approx. 6 operating hours)
• A funnel (suitable for the tankʼs petrol filler neck)
• Household wipes (to wipe up oil/petrol residue; dispose of these at a filling station)
• A petrol suction pump (plastic, available from DIY stores)
• An oil can with hand pump (available from DIY stores)
• Spark plug wrench
• 0.4 liter of engine oil (SAE 30/ 10W30)
Assembly
1. Take the mower and attachment parts out of the packaging and check that all
parts are present.
2. Attach the lower push bar (3a) to both sides of the mower with one round head
screw (a), one washer (b) and one star grip nut (4) each. Make sure that the cables,
which will be attached later, are not in the way (Fig. 2-3).
3. Attach the upper push bar (3) on the lower push bar (3a) with one round head
screw (a), one washer (b) and one star grip nut (4) each on both sides (Fig. 4-5).
4. Insert the pull starter (16) in the designated hook as shown in Fig. 6.
5. Fix the cables to the push bar with the cable clips (17) provided (Fig. 7).
6. Grass catcher (15) - open it up and click the plastic clips into position on the frame
(Fig. 8).
7. Mowing with grass catcher:
Lift the discharge flap (14) with one hand and hang the grass catcher (15) as
shown in Fig. 9.
AFTER SALES SUPPORT
1300 855 831

MODEL: MP132-42 PRODUCT CODE: 704437 01/2021
 support@scheppach.com.au
AUS AUS

Before first use

<Chapter>
19