Safety Information And Safety Measures - Siemens ARCADIS Varic Manual

Prerequisites

Safety Information and Safety Measures

NOTE
WARNING
Symbols
X
This symbol means "X-ray", checks and adjustments that must be performed with
radiation ON.
Siemens AG
Medical Solutions
When performing service work and tests, please observe:
- the product-specific information in the document Replacement
of Parts, SPR2-310.841.01..
- the safety information in TD00-000.860.01.. in the Register in the
ARCADIS binder, as well as
- the safety information contained in the ARTD, Part 2.
Dangerous X-radiation during checks and adjustment work steps.
Risk of death or serious physical injury.
For checks and adjustments that must be performed with
radiation switched on, the prescribed radiation safety
measures must be observed; if necessary, wear radiation
protective clothing (see also ARTD-002.731.02.. and
ARTD-002.731.38.. General Guidelines for Technical Ser-
vice). These checks and adjustments are explicitly
labeled on the following pages with the radiation warning
symbol x .
SPR2-310.842.01.07.02
12.06
Page 5 of 34
CS SD 24
5
1.1
ARCADIS Varic / Orbic