Information On Product Safety And Protective Measures - Siemens MOBILETT XP Digital Installation And Startup

General

Information on product safety and protective measures

DANGER
DANGER
DANGER
Siemens AG
Medical Solutions
While performing maintenance and service work
on the MOBILETT XP Digital with the covers removed,
it is possible to come into contact with components under voltage.
Carelessness can result in death or serious bodily injury.
When conducting maintenance and service work, follow:
the product-specific safety information contained in the
technical documentation,
and the general safety information (TD00-000.860.01...).
Remove or install components only if:
- The system is switched off, and
- The capacitors are discharged, and
- The ESD guidelines are followed, and
- The batteries have been disconnected.
Releasing radiation:
Checks and settings for which radiation must be
released are marked with the radiation warning symbol.
Radiation protection measures must be used.
SPR8-230.814.30.03.02
11.05
MOBILETT XP Digital
Page 9 of 70
CS SD 24
9
0