Ferm ESM1013 Original Instructions Manual page 7

Technical specifications
Model No.
Voltage
No load speed
Sanding pad diameter
Weight
Sound pressure level LPA
Sound power level LWA
Vibration
Only use the following batteries of the FERM
POWER 20V battery platform. Using any other
batteries could cause serious injury or damage
the tool.
CDA1136 20V, 2Ah Lithium-Ion
CDA1138 20V, 4Ah Lithium-Ion
The following charger of the can be used to
charge these batteries.
CDA1137 Quick charger
The batteries of the FERM POWER 20V battery
platform are interchangeable with all the FERM
POWER 20V battery platform tools.
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given in
EN 62841; it may be used to compare one tool
with another and as a preliminary assessment of
exposure to vibration when using the tool for the
applications mentioned:
- using the tool for different applications, or with
different or poorly maintainted accessories,
may significantly increase the exposure level
- the times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level.
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping your
hands warm, and organizing your work patterns.
Description
The numbers in the text refer to the diagrams on
page 2 and 3.
1. On/off switch
2. Dust bag
3. Speed adjustment wheel
4. Sanding pad
5A. Upper grip
ESM1013
5B. Lower grip
20V
6.
5.000-10.000/min
7.
125mm
8.
1.20 kg
9.
77.1 dB(A), K=3dB(A)
10. Rubber ring
88.1 dB(A), K=3dB(A)
11. Battery LED indicators button
7.511 m/s K=1.5 m/s
2 2
12. Battery LED indicators
13. Charger
14. Charger LED indicators
15A. Vacuum connection
15B. Vacuum adapter
3. ASSEMBLY
Inserting the battery into the machine (Fig. C)
1. Insert the battery (8) into the base of the
2. Push the battery further forward until it clicks
Removing the battery from the machine (Fig. C)
1. Push the battery unlock button (7).
2. Pull the battery out of the machine like shown
External dust extraction
The vacuum connection (15A) allows a vacuum
cleaner to be attached to the machine. Also
included is a vacuum adapter (15B), which allows
use of smaller diameter vacuum pipes.
Dust extraction port
Battery unlock button
Battery
Sanding paper
Before any work on the power tool,
remove the battery.
The battery must be charged before first
use.
Ensure that the exterior of the battery is
clean and dry before connecting to the
charger or machine.
machine as shown in Fig. C.
into place.
in Fig. C.
When the machine is not being used over
a longer period of time it is best to store
the battery in charged condition.
7