Overview - Nuvoton NK-NUC980 Quick Start Manual

Hide thumbs Also See for NK-NUC980:

Table of Contents

NK-NUC980 Quick Start Guide

OVERVIEW

This document will provide a quick guide for BSP of Nuvoton NUC980 series chips. Users can realize

what the NUC980 Non-OS BSP contains, use the NK-NUC980 quickly and understand the operation

process of NuWriter and U-boot.

The NK-NUC980 is a development board based on an ARM

ARM926EJ-S microprocessor

NUC980DF61YC which has very rich peripherals to help users easily to design-in their products or

application systems.

The NK-NUC980 board uses NUC980DF61YC microprocessor run up to 300 MHz with built-in 64MB

DDR2 memory, 16 KB I-cache, 16 KB D-cache and MMU, 16 KB embedded SRAM and 16.5 KB IBR

(Internal Boot ROM) for system booting from USB, NAND flash, SD/eMMC and SPI Flash, All functions

of the NUC980DF61YC are placed on the board, including peripheral interfaces such as memory

(NAND, SPI, eMMC, SD), UART, IIS, Ethernet, USB (device, HOST), CMOS sensor, SIM card, CAN,

JTAG and EBI, Users can use it to develop and verify applications to emulate the real behavior.

Figure 1-1 NK-NUC980 Board

Dec 25, 2018

Page 3 of 22

Rev 1.00

Table of Contents