Assem Bly And Operation; Applications; Prior To Operation - Hitachi CM 4SB2 Safety Instructions And Instruction Manual

English

ASSEM BLY AND OPERATION

APPLICATIONS

Cutting and scribing of concrete.
Cutting and scribing various types of stones.
Cutting and scribing various types of tiles.

PRIOR TO OPERATION

1. Pow er source
Ensure that the pow er source to be utilized conform s to the pow er source requirem ents
specified on the product nam eplate.
2. Pow er sw itch
Ensure that the sw itch is in the OFF position. If the plug is connected to a receptacle
w hile the sw itch is in the ON position, the pow er tool w ill start operating im m ediately
and can cause serious injury.
3. Extension cord
When the w ork area is far aw ay from the pow er source, use an extension cord of
sufficient thickness and rated capacity. The extension cord should be kept as short as
practicable.
4. Check the receptacle
If the receptacle only loosely accepts the plug, the receptacle m ust be repaired. Contact
a licensed electrician to m ake appropriate repairs.
If such a faulty receptacle is used, it m ay cause overheating, resulting in a serious
hazard.
5. M ounting the diam ond w heel
For details, refer to the item " M ounting and dism ounting the diam ond w heel" .
6. Confirm that the cutting depth adjusting lever is securely clam ped.
12
WARNING:
Damaged cord must be replaced or repaired.