Zennio EyeZen RF ZPDEZRF868 User Manual page 10

Finally, it is also possible to set custom sensitivity values for the motion sensor. Factors
such as the motion speed and direction together with the distance to the device may
have a positive or negative effect the motion detection.
Distance
Longer
Negative
Therefore, low sensitivity may prevent the detection of slower and front movements,
especially at longer distances from the sensor. On the other hand, higher sensitivity
may saturate the detection, especially at shorter distances.
ETS PARAMETERISATION
Sensitivity [1...90...100] [%]: sensitivity for the motion sensor.
LED Detection Lighting
reset]: activates or deactivates the LEDs that indicate motion detection.
Note: Enabling this functionality may shorten battery life of the device
HVAC Control
following parameters
https://www.zennio.com
Shorter Greater
Positive Positive
Table 1. Factors conditioning the motion detection
Figure 5. Movement Detector. Configuration.
[Disabled
[Off / On]: activates the climate system control, showing the
Speed
Lower
Negative Negative
/ Enabled / Enabled during 5 minutes after
Technical Support:
EyeZen RF
Direction
Front Tangential
Positive
https://support.zennio.com
10