Rc Acpi Settings; Cpu Configuration - DFI CMS101 User Manual

Thin mini-itx
Hide thumbs Also See for CMS101:
Table of Contents

Advertisement

Advanced
X

RC ACPI Settings

Wake system from S5 via RTC
When Enabled, the system will automatically power up at a designated time every day. Once
it's switched to [Enabled], please set up the time of day — hour, minute, and second — for the
system to wake up.
State After G3
Select between S0 State, and S5 State. This field is used to specify what state the system is set
to return to when power is re-applied after a power failure (G3 state).
• S0 State
The system automatically powers on after power failure.
• S5 State
The system enter soft-off state after power failure. Power-on signal input is
required to power up the system.
• Last State
The system returns to the last state right before power failure.
User's Manual | CMS101/CMS103
Advanced
X

CPU Configuration

Intel (VMX) Virtualization Technology
When this field is set to Enabled, the VMM can utilize the additional hardware capabilities pro-
vided by Vanderpool Technology.
Active Processor Cores
Select number of cores to enable in each processor package: all or 1.
Hyper-threading
Enables this field for Windows XP and Linux which are optimized for Hyper-Threading technol-
ogy. Select disabled for other OSes not optimized for Hyper-Threading technology. When dis-
abled, only one thread per enabled core is enabled.
Chapter 3
BIOS SETTINGS
28

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CMS101 and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Cms103

Table of Contents