Table of Contents
Advertisement
Advanced
X
NCT6126D HW Monitor
This section displays the system's health information, i.e. voltage readings, CPU and system
temperatures, and fan speed readings
Case Open
Enable or disable the case open detection function.
User's Manual | CMS101/CMS103
Advanced
X
NCT6126D HW Monitor
► Smart FAN Function
Smart Fan is a fan speed moderation strategy dependent on the current system temperature.
When the system temperature goes higher than the Boundary setting, the fan speed will be
turned up to the setting of the Fan Speed Count that bears the same index as the Boundary
field.
SYS Smart Fan/CPU Smart Fan Control = [Enabled]
• Boundary 1 to Boundary 4
Set the boundary temperatures that determine the fan speeds accordingly, the value ranging
from 0-127°C. For example, when the system temperature reaches Boundary 1 setting, the fan
speed will be turned up to the designated speed of the Fan Speed Count 1 field.
• Fan Speed Count 1 to Fan Speed Count 4
Set the fan speed, the value ranging from 1-100%, 100% being full speed. The fans will operate
according to the specified boundary temperatures above-mentioned.
Chapter 3
BIOS SETTINGS
32
Advertisement
Table of Contents
