www.wtliving.com
Table of Contents, Before You Begin, Safety Information
Preparation and Assembly
Operation
Care and Maintenance
Warranty Information
BEFORE YOU BEGIN
Please read and understand this entire manual before attempting to assemble, operate or install this
appliance. If you have any questions regarding the product, please email us at cservice@welltraveled.net.
This manual contains important information about the assembly, operation and maintenance of this appliance.
General safety information is presented in the first few pages and is also located throughout this manual. Keep
this manual for future reference and to educate new users of this appliance.
SAFETY INFORMATION
To Reduce the Risk of Fire
1. Do not place any objects such as furniture, papers, clothes and curtains
closer than 3 feet to the front of the heater and keep them away from the
sides and rear when the heater is plugged in.
2. Do not place the heater near a bed because objects such as pillows or
blankets can fall off the bed and be ignited by the heater.
3. Always unplug the heater if it is not being used.
4. Avoid the use of an extension cord because the extension cord may
overheat and cause a risk of fire. However, if you have to use an extension
cord, the cord should be N014 AWG minimum size and rated not less than
1875 watts.
PARTS AND HARDWARE
Head with
Power Cord
Support Pole
Base
Contact us for assistance: cservice@welltraveled.net
TABLE OF CONTENTS
WARNING
Keep combustible materials such as furniture, papers, clothes and
curtains at least 0.91m/3ft from the front of the heater, and away
from the sides and rear. Attach base before using.
CAUTION
Screw x2
Cable Clip
Page 2
Page 3
Page 4
Page 5
Page 6
CAUTION
Risk of Fire
Risk of Electric Shock — Do not open.
No user - serviceable parts inside.
REQUIRED FOR ASSEMBLY
(not included)
Phillips Head
Screwdriver
2