Table of Contents
Advertisement
Step 4: Install and Configure Lattus A10 Software and NAS Services
Configuring objs.conf
42
1 From the left panel, click Configuration > Storage Destinations.
The Lattus Object Storage dialog box appears.
2 Click New, and then enter the following fields:
• ID: This identification string defines the new Lattus Object
Storage destination. Enter objs1.
• Provider: The REST interface used to access Lattus Object
Storage. Select Lattus AXR or Lattus S3.
• S3 Virtual Hosting: If you use the Lattus S3 REST interface, set
this to True if you are using a virtual hosting style. By default,
the path style is used to construct the URL to access Lattus
Object Storage.
• Manager Protocol: Select the protocol you want the Lattus
Object Storage Manager GUI interface to use. By default, the
protocol is set to http.
Lattus A10 Access Node Installation Guide
Advertisement
Table of Contents
