Driveline Maintenance - Hillco JS7020 Operator's Manual

The Transition Pivot Pin and the Rear Drop Axle
Spacer utilize Graphite Micarta Bushings that
do not require grease.

Driveline Maintenance

Standard PTO Style Drive Shafts - These drive
shafts utilize a single cross at each end of the
drive shafts. Grease zerks on both crosses and
the zerk on the outer profile tube (at the slip
joint) should be greased on 50-hour intervals.
Constant Velocity Drive Shafts - These drive
shafts utilize two universal joints and a ball-and-
socket joint at each end of the drive shaft. There
are a total of 7 grease zerks per drive shaft and
they must be greased on 8-hour intervals and
more frequent in severe duty applications.
It is important that headers
Notice
equipped
greased
intervals to prevent damage.
Warranty will not cover drivelines
D-171206CMA01C
CV drivlines
at the appropriate
not properly maintained.
Hillco Technologies, Inc.
Graphite Micarta Bushings
be
40
Sept, 2022