Table of Contents
Advertisement
Right Paddle Beater Bearing
Paddle Beater Jack Shaft Bearings
50 HRS
A
Hydraulic Filter
On JH7020 models replace the filter (B) after the first 100 hrs of service, then 400 hr intervals. Replace
with John Deere Filter Part No AH128449.
Driveline Maintenance
Standard PTO Style Drive Shafts - These drive
shafts utilize a single cross at each end of the
drive shafts. Grease zerks on both crosses and
the zerk on the outer profile tube (at the slip
joint) should be greased on 50-hour intervals.
Constant Velocity Drive Shafts - See the
Constant Velocity Driveline Maintenance Guide
at the end of this manual. Greasing CV drivelines
at the correct time intervals is very important.
D-180215CMA01C
As Needed
50 HRS
Left Paddle Beater Bearing
Notice
Hillco Technologies, Inc.
39
Pivot Pin
A
It is important that headers
equipped
CV
greased
at
the
intervals to prevent damage.
Warranty will not cover drivelines
not properly maintained.
C
D
E
F
G
drivlines
be
appropriate
K
L
M
Sept. 2022
Advertisement
Table of Contents
