Diagnostics - Hillco JS7020 Operator's Manual

Diagnostics

From the Main Menu highlight Diagnostics using the up/
down arrows. Press Enter (A) to enter the diagnostics
menu.
The Diagnostics menu allows the operator to view output
information from the electrical system on the leveling
system.
Using the up/down arrows, highlight Clinometers and
press Enter (A) to view the output of the clinometers.
Clinometers
Fore/Aft (B) shows the current clinometer output. By
driving up or down a hill this value will change.
Left/Right (C) shows the current clinometer output.
By leveling the combine back and forth the values will
change.
The value for Level Zero Setpoint and 4WD Zero
Setpoint (D) are the current calibration values. These
values are set in the Calibration screen under Left/Right
Clinometer and Fore/Aft Clinometer.
D-171206CMA01C
B
C
D
Hillco Technologies, Inc.
34
Main Menu
Operator Settings
Calibration
Diagnostics
Active Alarms
Dealer Settings
A
Diagnostics
Clinometers
Carriage Sensor
Valve Coils
Joystick
Combine CAN
A
Clinometers
Fore/Aft Output
Left/Right Output
Level Zero Setpoint
4WD Zero Setpoint
2570
2510
2570
2510
Sept, 2022