Hillco JS7020 Operator's Manual page 59

NOTE: Dimensions are approximate and subject to change without notice.
Dimension Reference Points are on the previous page.
Dimension
John Deere Models
Leveling Controller
Leveling Speed
Leveling Hydraulic System
Header Lateral Tilt Control
Feeder Transition
Weight added to combine
Due to different tire configurations, row spacings, axle configurations, wheel offsets, axle positions and spindles
a
types, machine widths will vary. Measurements given in chart are for minimum and maximum widths with single
drive tires. For more detailed width information please contact Hillco.
D-171206CMA01C
JS9020
900/60R32 Front Tires
620/75R26 Rear Tires
S680, S690, S780, S790
36 ft 3 in, (22 ft 5 in Standard
A
Unloading Auger)
B 28 ft 1 in
C 16 ft 3 in (400 bu. Folding)
D 15 ft 10 in
E 15 ft 1 in (400 bu. Extensions)
F 13 ft 2 in
G 13 ft
H 2 ft 2 in
I 12 ft 11 in
J 18% (10.2°)
K 10 ft 1 in
a
L 12 ft 6 in
a
M 15 ft 11 in
a
Integrated into Combine's
Close Center Hydraulics
Hydraulic Master / Slave Cylinder w/ Auto/Manual Override
4,100 lbs
Hillco Technologies, Inc.
JS7020
900/60R32 Front Tires
480/70R30 Rear Tires
S650, S660, S670, S760, S770
33 ft 6 in, (22 ft 5 in Standard
Unloading Auger)
28 ft 2 in
16 ft 2 in (300 bu. Folding)
15 ft 9 in
15 ft (300 bu. Extensions)
13 ft 3 in
13 ft
2 ft 2 in
12 ft 11 in
18% (10.2°)
8 ft 7 in (Narrow UC),
10 ft 1 in (Std UC)
10 ft 11 in (Narrow UC),
12 ft 6 in (Std UC)
14 ft 3 in (Narrow UC),
15 ft 11 in (Std UC)
Clinometer (Accuracy +/- 3/4
Proportional Control with Auto / Manual
Gear Pump
Extended Feeder Chain
4,100 lbs
56
JS5010
30.5LR32 Front Tires
480/70R30 Rear Tires
S550
30 ft 11 in (18 ft 5 in
Unloading Auger
27 ft 9 in
NA
14 ft 10 in
13 ft 9 in
13 ft
12 ft 10 in
1 ft 11 in
12 ft 11 in
18% (10.2°)
8 ft 10 in (Narrow UC),
10 ft 1 in (Narrow UC
with dual extensions)
10 ft 11 in (Narrow UC),
12 ft 6 in (Narrow UC
with dual extensions)
14 ft (Narrow UC),
15 ft 7 in (Narrow UC
with dual extensions)
)
o
Gear Pump
3,700 lbs
Sept, 2022