Description Of The Seeder - Gaspardo ALITALIA 300 Use And Maintenance

3.0 DESCRIPTION OF THE SEEDER

This farming implement, can only be operated by a farming tractor equipped with lift unit and universal three-point hitch.
The seeder is suitable for use (by itself), or combined with equipment for working the land (harrow).
It is suitable for sowing:
Cereal:
Minute and forage seeds: ape, clover, sedge, rye-grass.
Large seeds:
The seeds are deposited in the soil by means of furrower tools (cutter, disc Corex or single disc). The quantities to be distributed are
controlled by a dosing device driven by an electric motor connected to the tractor speed sensor (See the Electrical Distribution Control
Operation and Maintenance Manual). The arms of the furrowing tools, independent of each other, dispose of a wide margin of oscillation
to adapt to the surface of the ground.
The seeder is suitable only for the uses indicated. The recommended working speed is 6÷8 km/h. The planting unit must only
be transported by road with the tanks and hoppers empty and at max speed of 25 km/h. Any other use different from that
described in these instructions could cause damage to the machine and represent a serious hazard for the user.
The machine must be operated by qualifi ed operators of the Customer. The operator must wear suitable personal protection
equipment (safety footwear, overalls and gloves, etc.).
This machine has been intended for professional use: it must be operated exclusively by preliminarily educated, trained and
authorised operators who hold a regular driving license.
Operating instructions
• The machine was manufactured for dosing and distributing commercial seeds of standard quality.
• It must be fi tted with a soil tilling equipment (rotating harrow), connected to the three-point hook-up of a tractor and operated by an operator.
• The machine is intended for professional users: operation must be allowed to skilled operators only.
• The machine must be operated by one operator only.
• The machine is not intended for purposes other than farming applications.
Conforming machine operation also includes:
• compliance with all the instructions provided in this manual;
• performance of inspection and maintenance operations described in this manual;
• exclusive use of genuine GASPARDO spare parts.
The machine can to sow on a gradient up to 10%.
The machine's correct operation is not guaranteed if having to plant
on a slope that is more than 10% steep.
We recommend doing the following:
• reduce advancement speed;
• increase the blower's rotation speed up to maximum power (see table herein);
• frequently check that pipes are not clogged by seeds;
• check the amount of used seeds per planted Ha, corresponds to that set;
• available on request to install the special doser for steep slopes, more information to contact our Technical servicing;
• do not, in any case, work on slopes that jeopardise the machine's stability.
Additional checks before operation
Below is a list of additional checks required before operating the machine:
• ensure that there are no remarkably big stones or rocks (diameter superior to 8 to 12 cm) on the soil;
• ensure that there are no protruding sections of trees (over 10 cm) having a diameter superior to 8 to 12 cm on the soil;
• ensure that there are no metal elements of any type whatsoever, but especially nets, cables, wire ropes, chains, pipes, etc. on the
soil.
Regular operation depends on the correct use and adequate maintenance of the equipment. It is advisable therefore to observe scru-
pulously what is described in order to prevent any inconveniences that could prejudicate proper operation and duration. It is just as
important to keep to what is described in this booklet since the Manufacturer declines all responsibility due to negligence and
non-observance of these rules.
At any rate the Manufacturer is available to assure immediate and accurate technical assistance and all that may be necessary for the
improved operation and better performance of the equipment.
The machine user shall be liable for damage caused by non-compliance with the instructions hereby.
cod. G19503392
USE AND MAINTENANCE
wheat, barley, rye, oats, rice.
soya, peas.

ATTENTION
Max. 10% Max. 10%
ENGLISH
Max. 10% Max. 10%
EN - 49