NetVanta 100 Series Hardware Installation Guide
2.
PHYSICAL DESCRIPTION
Reviewing the Front Panel Design
Figure 1
shows the NetVanta 150 front panel.
Front Panel LEDs
The NetVanta 150 WAP has four LED indicators on the front panel: a single bi-color LED for the
condition and three single color LEDs for the
Table 1
describes these LEDs.
LED
Activity
STAT
Green (flashing)
Green (solid)
Red (solid)
ETH
Off
Green (flashing)
Green (solid)
5 GHz/802.11a
Off
Green (flashing)
2.4 GHz/802.11b/g
Off
Green (flashing)
61700412E1-34C
Figure 1. NetVanta 150 Front Panel Layout
ETH
,
5 GHz/802.11a
Table 1. NetVanta 150 WAP LEDs
Indication
Unit is powering up. On power up, the STAT LED flashes until
the unit is ready for service. The STAT LED also flashes during
firmware upgrade.
Power is on.
An error condition is present on the unit.
There is no local area network (LAN) activity on the Ethernet
port (or unit is powered off).
LAN activity is present (traffic in either direction).
Powered device is connected to the Ethernet port (i.e., link
integrity).
There is no 802.11a wireless activity detected or the radio is
disabled.
Data is being transmitted or received via the 802.11a wireless
band. Data includes network traffic, as well as user data.
There is no 802.11g or 802.11b wireless activity detected or the
radio is disabled.
Data is being transmitted or received via the 802.11bg wireless
band. Data includes network traffic, as well as user data.
Copyright © 2010 ADTRAN, Inc.
Physical Description
, and
2.4 GHz/802.11bg
STAT
conditions.
19