ADTRAN NetVanta 100 Series Hardware Installation Manual page 6

FCC Compliance Notice: Radio Frequency Notice
FCC Compliance Notice: Radio Frequency Notice
NetVanta 150 Wireless Access Point ABG
Tested to Comply with
FCC Standards
For Home or Office Use
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired
operation.
Placement and Range Guidelines
The maximum indoor range for the NetVanta 150 device is 328 feet (100 m). However, the physical
placement of your wireless access point (WAP) can affect the operating range of the unit. When
determining the placement of your WAP, consider the following guidelines to avoid significant
performance degradation or inability to wirelessly connect to the WAP:
• Place the WAP away from potential sources of interference, such as PCs, large metal surfaces,
microwaves, and 2.4 GHz cordless phones.
• Place the WAP in an elevated location, such as a high shelf that is near the center of the wireless
coverage area for all mobile devices.
RF Exposure Warning for North America and Australia
To meet FCC and other national safety guidelines for RF exposure, the antennas for
this device must be installed with a minimum separation distance of 7.9 inch (20 cm)
from any person. The antennas shall not be colocated with any other antenna or
radio transmitter.
6
NetVanta 100 Series Hardware Installation Guide
Copyright © 2010 ADTRAN, Inc. 61700412E1-34C