Open Burners - Waldorf RNB8910GC Installation And Operation Manual

Open Burners ('F' - Flame Failure Option)

Open Burners

NOTE: Only cooking pans from size Ø 150mm to Ø 420mm are suitable fo use on these open Lighting the Open Burners
burners.
Flame Failure Protection is incorporated for each burner by way of a thermo-electric system which
will shut off gas supply to that burner in the event that burner goes out, so that un-burnt gas is not Flame Failure Option (F-Models)
expelled.
Lighting the Open Burners
Flame Failure Protection is incorporated for each burner by way of a thermo-electric system which
a. Select burner required, depress and turn the gas control knob anti-clockwise to 'HIGH' position.
will shut off gas supply to that burner should burner go out, so that un-burnt gas is not expelled.
b. Hold gas control knob depressed and manually light main burner.
a. Select burner required, depress and turn corresponding gas control knob anti-clockwise to 'HIGH'
c. Release gas control knob
position.
d. Burner should stay alight - if not, repeat Steps (a. to (c. above.
b. With gas control knob depressed, manually light burner.
e. To adjust the temperature required, depress and rotate gas control knob between 'HIGH' and
c. Release gas control knob
'LOW' positions.
d. Burner should stay alight - if not, repeat Steps (a to (c above.
e. To achieve simmer control, depress gas control knob and rotate between 'HIGH' and 'LOW'
Turning 'OFF' the Open Burners
positions to achieve temperature required.
a. When main burner is not required, depress and turn gas control knob clockwise back to 'OFF'
Turning 'OFF' the Open Burners
position. 'MAIN' burner will extinguish.
a. When main burner is not required, depress and turn gas control knob clockwise back to 'OFF'
position. 'MAIN' burner will extinguish.
Open Burners ('PF' - Pilot and Flame Failure Option)
Pilot and Flame Failure Option (PF-Models)
Lighting the Open Burners
Lighting the Open Burners
These hobs are fitted with individual standing pilots for each open burner which allows main burners
These hobs are fitted with individual standing pilots for each open burner which allows main burners
to be turned 'ON' - 'OFF' without need to manually re-light burner each time it is turned 'ON', as
to be turned 'ON' - 'OFF' without having to manually re-light burner each time that it is turned 'ON',
burner will automatically light itself off pilot burner.
as burner will automatically light itself off the pilot burner.
Flame Failure Protection is incorporated for each burner by way of a thermo-electric system which Flame Failure Protection is incorporated for each burner by way of a thermo-electric system which
will shut off gas supply to that burner in the event that burner goes out, so that un-burnt gas is not
will shut off gas supply to that burner should burner go out, so that un-burnt gas is not expelled.
expelled.
a. Select burner required, depress and turn corresponding gas control knob anti-clockwise to 'PILOT'
position.
a. Select burner required, depress and turn the gas control knob anti-clockwise to 'PILOT' position.
b. With gas control knob depressed, manually light pilot burner.
b. Hold gas control knob depressed and manually light pilot burner.
c. Release gas control knob
c. Release gas control knob
d. Pilot burner should stay alight - if not, repeat Steps (a to (c above.
d. Pilot burner should stay alight - if not, repeat Steps (b. to (c. above.
e. 'Full Flame' can now be achieved by depressing and rotating gas control knob anti-clockwise to
e. To select 'Full Flame', depress and rotate gas control knob anti-clockwise to first stop 'HIGH'
first stop 'HIGH' flame position.
flame position.
f. Low flame can be achieved by depressing gas control knob and rotating fully anti-clockwise to
f. To select 'Low Flame', depress and rotate gas control knob fully anti-clockwise to 'LOW' flame
'LOW' flame position.
position.
g. To achieve simmer control, depress gas control knob and rotate between 'HIGH' and 'LOW'
g. To adjust the temperature required, depress and rotate gas control knob between 'HIGH' and positions to achieve temperature required.
'LOW' positions.
Turning 'OFF' the Open Burners / Pilots
Turning 'OFF' the Open Burners / Pilots
a. To turn 'OFF' main burner, but keep pilot burner alight, rotate gas control knob to 'PILOT'
position. Main burner will extinguish and pilot will remain alight.
a. To turn 'OFF' main burner, but keep pilot burner alight, rotate gas control knob to 'PILOT'
b. To turn 'OFF' the 'PILOT', depress and turn gas control knob clockwise back to 'OFF' position.
position. Main burner will extinguish and pilot will remain alight.
'PILOT' burner will extinguish.
b. To turn 'OFF' the 'PILOT', depress and turn gas control knob clockwise back to 'OFF' position.
'PILOT' burner will extinguish.
after approximately 10-20 seconds after lighting burner.
after approximately 10-20 seconds after lighting burner.
after approximately 10-20 seconds after lighting pilot burner.
after approximately 10-20 seconds after lighting pilot burner.
11
Operation