Replacement
4.40 WLAN Shielding Adhesive Foil
Follow the 3.1 Disassembly instructions.
Prepare the new WLAN Shielding Adhesive Foil.
Follow the 5.7 Reassembly instructions.
REMOVAL
Detach and remove it with a Flex Film Assy Tool.
Scrap the WLAN Shielding Adhesive Foil! It cannot be
reused!
INSTALLATION
Attach a new WLAN Shielding Adhesive Foil by aligning the
corner as shown.
Press to secure its attachment.
1251-8382 Rev 2
©
Sony Ericsson Mobile Communications AB – Company Internal
Working Instructions (mech)
73(85)