Reassembly
Apply 12 Ncm torque when tightening the Screw Other
Len:1.6 Diam:1.4with Bits (JCIS No 0).
Take new screws!
Place the Screw Cap properly.
Press to secure its attachment.
Keep the position of the slider as shown, and then
continue with the next actions!
5.2
Lower Front Cover Assy
Mount the Lower Front Cover Assy onto the upper module
by threading the Hinge FPC through the hole.
1251-8382 Rev 2
©
Sony Ericsson Mobile Communications AB – Company Internal
Working Instructions (mech)
77(85)