3.11
Dome Foil assembly
3.11.1
•
Blunt Pair of tweezers
•
Flexfilm assembly tool NTZ 112 521
3.11.2
•
ESD-gloves (cotton gloves)
•
ESD-wristband
3.11.3
•
Disassemble the phone as described in 1 Disassembly
#
1
2
3
3/000 21-1/FEA 209 544/76 C
SonyEricsson Mobile Communications AB
Process tool
Equipment
Instructions
Figure
Fig3.11.1
Fig 3.11.2
Fig 3.11.3
Working Instructions, SP/Mechanical
Instruction
Open the FPC connector to
the key foil assembly with a
pair of tweezers.
(fig3.11.1)
Remove the dome foil with
the flex film assembly tool.
(fig 3.11.2)
Take a new Key foil and
mount it in the FPC
connector. Push it into the
FPC connector with the flex
film assembly tool. It is in
the proper position when the
edge (1) is tight to the FPC
connector.
(fig 3.11.3)
Note
Be careful not to damage
the FPC-connector.
Be careful not to damage
the flex film with the flex
film assembly tool.
25(33)