Replacement
4.17 Conductive Cushion
Follow the 3.1 – 3.7 Disassembly instructions.
Prepare the new Conductive Cushion.
Follow the 5.1 – 5.7 Reassembly instructions.
REMOVAL
Remove the Conductive Cushion using a Flex Film Assy
Tool
INSTALLATION
Mount a new Conductive Cushion into its cavity.
Gently press to secure its position.
The instructions are applicable to all four Conductive
Cushions as shown.
1251-8382 Rev 2
©
Sony Ericsson Mobile Communications AB – Company Internal
Working Instructions (mech)
33(85)