Table of Contents
Advertisement
3.14 Key dome/Blue led`s/Foil
Tools
•
Torque screwdriver, set to 15Ncm ± 6 %. Bits NTZ 112 1052
•
By hand.
•
Blunt pair of tweezers.
Instruction
•
Disassemble the phone as described in 1 Disassembly Upper & Lower cabinets, step 1-11.
#
Figure
1
•
Assemble the phone as described in 2 Reassembly Upper & Lower cabinets, step 1-9.
3.15 Battery spring
Tools
•
Torque screwdriver, set to 15Ncm ± 6 %. Bits NTZ 112 1052
•
Opening tool NTZ 112 302/2
•
Blunt pair of tweezers
Instruction
•
Disassemble the phone as described in 1 Disassembly Upper & Lower cabinets, step 1-5.
#
Figure
1
•
Assemble the phone as described in 2 Reassembly Upper & Lower cabinets, step 8-9, 21-22.
3/000 21-1/FEA 209 544/80 C
Sony Ericsson Mobile Communications AB
Fig.3.18
Fig.3.19
Instruction
1. Remove the dome switch
foil with a blunt pair of
tweezers or by hand.
2. Assemble a new one with
your fingers.
(Fig.3.18)
Instruction
Remove the old spring and
replace with a new one.
(Fig.3.19)
Working Instruction, SP/Mechanical
Note
Before removal of the
dome switch foil –notice
the position of the foil,
check the guideholes.
After removal – clean the
surface of the frame with
Isopropyl alcohol.
Note
After reassembling of the
phone, check the spring
from the outside – you
should feel it when sliding
on the batterycover.
25(41)
Advertisement
Table of Contents
