Hinge Assy; Lower Front Cover Assy; Lower Rear Cover Assy; Screw Cap - Sony Ericsson Xperia Mini Pro Working Instructions

Replacement
4.5

Hinge Assy

Follow the 3.1 – 3.7 Disassembly instructions.
Follow the 4.37 Removal instructions.
Prepare the new Hinge Assy.
Follow the 4.23, 4.24 and 4.37 Installation instructions.
Follow the 5.1 – 5.7 Reassembly instructions.
Install a new Hinge FPC and Hinge FPC Clip!
Do not need to install a new Hinge Assy Adhesive Foil!
4.6

Lower Front Cover Assy

Carry out the 4.28 Removal as described below.
Follow the 3.1 – 3.6 Disassembly instructions.
Follow the 4.11, 4.30 and 4.31 Removal instructions.
Prepare the new Lower Front Cover Assy.
Follow the 4.11, 4.30, 4.31 and 4.38 Installation instructions.
Follow the 5.2 – 5.7 Reassembly instructions.
Carry out the 4.28 Installation as described below.
Install a new Main Keypad and install a new Volume Key
in case of adhesive missing!
4.7

Lower Rear Cover Assy

Follow the 3.1 – 3.3 Disassembly instructions.
Follow the 4.10 Removal instructions.
Prepare the new Lower Rear Cover Assy.
Follow the 4.12, 4.21, 4.10 and 4.27 Installation instructions.
Follow the 5.5 – 5.7 Reassembly instructions.
Install a new Camera Key FPC, Flash LED FPC and Main
Antenna Switch Protective Film!
Do not need to install a new Audio Jack Adhesive Foil
and Flash LED FPC Adhesive Foil!
4.8

Screw Cap

Follow the 3.1 – 3.7 Disassembly instructions.
Prepare the new Screw Cap.
Follow the 5.1 – 5.7 Reassembly instructions.
Scrap the Screw Cap! It cannot be reused!
1251-8382 Rev 2
©
Sony Ericsson Mobile Communications AB – Company Internal
Working Instructions (mech)
18(85)