Replacement
4.24 Hinge FPC Clip
Follow the 3.1 – 3.7 Disassembly instructions.
Prepare the new Hinge FPC Clip.
Follow the 5.1 – 5.7 Reassembly instructions.
REMOVAL
Push off the Hinge FPC Clip using a Front Opening Tool.
Remove it by fingers.
Scrap the Hinge FPC Clip! It cannot be reused!
INSTALLATION
Push one of the hooks of the Hinge FPC Clip into the hole
as shown (1).
Pull the clip as shown to secure its proper position (2).
Do not scratch the FPC!
1251-8382 Rev 2
©
Sony Ericsson Mobile Communications AB – Company Internal
Working Instructions (mech)
52(85)