GS09, Setting Up and Starting Up
*
Before the point is measured, the position mode icon is the moving icon, indi-
cating that the rover can still be moved around.
** As the point is being measured, the position mode icon changes to the static
icon, indicating that the rover should remain stationary.
***SHIFT QUIT (F6) always terminates the survey operation. In this case all data
collected since pressing OCUPY (F1) is lost.
2.b Surveying the Point
•
Move to the point, enter the point ID.
•
Enter the antenna height.
For Leica standard poles = 2.00 m.
•
Press OCUPY (F1) to start measuring
the point.*,**,***
Press STOP (F1) when enough data
is collected for the point.
Press STORE (F1) to store the point.
•
Are more points to be surveyed?
If yes, repeat the first three points.
If no, continue with the next point.
•
Continue to press ESC until the Main
Menu screen appears.
66