GS09, Setting Up and Starting Up
2.b Selecting the Antenna
•
Select the antenna.*
For a pillar setup, select GS09 Pillar.
For a tripod setup, select GS09
Tripod.
•
Press SRCH (F4) to start searching
for the antenna, via Bluetooth.
•
Press CONT (F1) to continue.
2.c Setting the Radio Channel**
•
Enter the radio channel. It is impor-
tant to remember that the radio at
the reference and the radio at the
rover must be set to the same
frequency.
Press SCAN (F5) to scan for the radio
at the reference.
•
Press CONT (F1) to continue.
55