Setup and Startup
for real-time refer-
ence step-by-step
GS09, Setting Up and Starting Up
Step
Description
1.
Setting Up the Equipment
•
Set up the tripod, mount and level the tribrach onto the tripod.
•
Check that the tribrach is correctly centred over the marker.
•
Place and lock the carrier into the tribrach.
•
Screw GS09 antenna onto the carrier.
•
Check that the tribrach is still correctly positioned and levelled.
•
Hang the external battery onto a tripod leg.
•
Hang the tripod bracket onto a tripod leg and attach the radio housing
onto the tripod bracket. Make sure that the radio antenna is screwed
onto the radio housing.
•
Take the Y-cable.
•
Attach the connector with the 8 pin plug to GS09 antenna.
•
Attach the connector with the 5 pin plug to the external battery.
•
Attach the connector without pins to the radio housing.
•
Insert the CompactFlash card into CS09 field controller.
•
Insert the battery into CS09 field controller and turn on CS09 field
controller and GS09 antenna.
53