Table 1-1: The Interfaces And Explanation Of The Front Panel Of Ap200 - AddPac VoiceFinder AP200 Installation Manual

VoiceFinder AP200 VoIP Residential Gateway Installation Guide Version 1.0
Table 1-1 shows the functional explanation about each LED of VoiceFinder AP200
Gateway.

Table 1-1: The interfaces and explanation of the front panel of AP200

No.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
※ The LEDs on the front panel are vary by each VoiceFinder AP200 Gateway models.
AddPac Technology Co., Ltd.
Interface
Power LED, display whether external power is supplied normally or
POWER
not. (Green)
FXS0
Display the operation status of "FXS0" voice interface port. (Orange)
FXS1
Display the operation status of "FXS1" voice interface port. (Orange)
PSTN
Display the operation status of PSTN backup port (Red)
LAN0
Display the operation status of LAN0 port.(Active
ACT0
Display the TX/RX status of LAN0 port. (Active
LAN1
Display the operation status of LAN1 port.(Active
ACT1
Display the RX/TX status of LAN1 port. (Active
Explanation
Green)
Orange)
Green)
Orange)
18
46/