Removing The Mdc Modem - NEC Versa M340/E2000 Disassembly Manual

Removing the MDC Modem

To remove the MDC Modem, first remove the battery (see
the Keyboard (see
1. Release all screws on heat plate as shown in Fig. 13
2. Release screws and disconnect cable on MCD Modem as shown in Fig. 14
3. Lift up the MDC modem and put it aside.
Removing the Keyboard) then perform the following steps:
Fig. 13 Heat Plate
Fig. 14 MDC Modem
NEC Versa M340/E2000 Disassembly Manual
Removing the Battery) and remove
A = M2.5x5 Silver
B = M2.5x5 Black
M2.5x5 Black
Page 12