Removing The Wlan Card Module - NEC Versa M340/E2000 Disassembly Manual

Removing the WLAN Card Module

To remove the WLAN Card Module first remove the battery (see
remove the Keyboard (see
3. Release all screws on heat plate as shown in Fig. 11
4. Remove the wireless antenna connector and release the WLAN Card Module as shown in
Fig. 12
Removing the Keyboard) then perform the following steps:
Fig. 11 Heat Plate
Fig. 12 Wireless Card Module
NEC Versa M340/E2000 Disassembly Manual
Removing the Battery) and
A = M2.5x5 Silver
B = M2.5x5 Black
Page 11