Table of Contents
Advertisement
PnP/PCI Configurations
This section shows how to configure the PCI bus system. It covers
some very technical items and it is strongly recommended that only
experienced users should make any changes to the default settings.
Reset Configuration Data
Resources Controlled By
x IRQ Resources
PCI/VGA Palette Snoop
↑↓→←
: Move
F5: Previous Values
The settings on the screen are for reference only. Your version may not be
identical to this one.
Reset Configuration Data
Enabled The BIOS will reset the Extended System Configuration
Data (ESCD) once automatically. It will then recreate a
new set of configuration data.
Disabled The BIOS will not reset the configuration data.
Phoenix - AwardBIOS CMOS Setup Utility
PnP/PCI Configurations
Disabled
Auto(ESCD)
Press Enter
Disabled
Enter: Select
+/-/PU/PD: Value
F6: Fail-Safe Defaults
BIOS Setup
Item Help
Menu Level
F10: Save
ESC: Exit
F1: General Help
F7: Optimized Defaults
3
9 3
Advertisement
Table of Contents
