DFI G5C100-N User Manual page 34

2
Hardware Installation
Intel Core Duo/Solo, Core2 Duo CPU FSB Select
Jumpers JP1, JP2 and JP3 are used to select the Front Side Bus of
the CPU.
34
Important:
• If you are using a CPU whose frequency has been locked
by the manufacturer, overclocking will have no effect.
• Overclocking may result to the CPU's or system's instability
and are not guaranteed to provide better system perform-
ance. If you are unable to boot your system due to
overclocking, make sure to set these jumpers back to their
default settings.
1 2 3
1
JP1
JP1
JP2
JP2
JP3
JP3
Auto Detect 533MHz FSB
FSB
2 3