DFI G5C100-N User Manual page 9

Graphics • Integrated graphics interface
- Analog CRT
- LVDS interface
• Internal graphics features
- DVMT 3.0 support
- Intel
- Intel
- Dual Independent display pipes
- Intel Gen 3.5 Integrated Graphics Engine
LAN • Two Marvell 88E8053 PCI Express Gigabit controllers
• Suppor ts 10Mbps, 100Mbps and 1Gbps data transmission
• IEEE 802.3 (10/100Mbps) and IEEE 802.3ab (1Gbps) compliant
Serial ATA • Supports two Serial ATA interfaces which are compliant with
SATA 1.0 specification (1.5Gbps interface)
• Supports AHCI SATA mode
IDE • Supports up to two IDE devices
• Supports Ultra ATA 100/66/33
Note: We do not recommend using IDE devices and CF card at
Rear Panel I/O • 1 mini-DIN-6 PS/2 mouse port
Ports • 1 mini-DIN-6 PS/2 keyboard port
• 3 DB-9 serial ports
• 1 DB-15 VGA port
• 2 RJ45 LAN ports
• 4 USB 2.0/1.1 ports
• Mic-in, line-in and line-out
I/O Connectors • 1 CompactFlash socket
• 2 connectors for 4 additional external USB 2.0/1.1 ports
• 1 connector for 1 external serial port
• 1 LCD brightness control connector
• 1 LVDS LCD panel connector
• 1 LCD/inverter power connector
• 1 LCD AUX power connector
• 1 DIO connector
• 1 front audio connector for line-out and mic-in jacks
• 1 CD-in internal audio connector
• 1 S/PDIF-out connector
• 1 connector for IrDA interface
• 2 Serial ATA connectors
• 1 40-pin IDE connector and 1 floppy connector (FPC type)
• 1 20-pin ATX power connector
• 1 front panel connector
• 1 chassis open connector
• 2 fan connectors
- Integrated 400MHz RAMDAC
- Analog monitor supports up to UXGA
- Panel support up to UXGA (1600x1200)
- TFT panel supports up to 1x24 bpp (single channel) / 2x24
bpp (dual channel)
®
Dual-Frequency Graphics Technology
®
Smart 2D Display Technology
the same time.
Introduction
1
9