Table of Contents
Advertisement
User Setup
Table for button
presses that are
required for
entering various
menus
How to Change Settings in the Setup Screens
To enter the setup screens, press the MODE button, and
simultaneously press FAN button for 5 seconds. Release the buttons
when you see "Setup" on the display. Use the WARMER or COOLER
buttons to adjust the value of your selection. Press MODE to advance
to the next setup step. Press MODE and FAN together again to leave
the setup screens.
MODE
press together for
5 seconds
Setting the Clock and Day (setup step 1 & 2)
When your thermostat is connected to Skyport Cloud Services, the
time and day of the week are controlled by Skyport. There is no local
adjustment, Skyport also adjusts the time for Daylight Savings Time
as well.
To set the time and day when not connected to Skyport; enter the
setup screens by pressing the MODE button and simultaneously
pressing the FAN button for 5 seconds.
TO ENTER MENUS BUTTON PRESS
Setup Steps
Time Schedule
Emergency Heat
Lockout Buttons
Calibration
Wireless Setup
FAN
MODE & FAN for 5 seconds
MODE & Up for 2 seconds
Up & FAN for 2 seconds
MODE, Up & Down for 2 seconds
MODE & Down for 2 seconds, then MODE
FAN for 5 Seconds
17
(Continued)
Advertisement
Table of Contents
