Table of Contents
Advertisement
About Advanced Features & Operation
Calibration
Under normal circumstances it will not be necessary to adjust
the calibration of the temperature sensor. If calibration is
required, please contact a trained HVAC technician to correctly
perform the following procedure.
MODE
1
Place the thermostat in the OFF mode.
2
Press and hold the MODE button. While
MODE
holding the MODE button, press and hold
the DOWN button for 5 seconds.
All icons will appear on the display.
3
Press the MODE button once. The thermostat
MODE
temperature will be displayed and may be
calibrated using the UP or DOWN buttons. The
calibrated offset from the "raw" temperature
reading is displayed in the lower right corner.
Additionally, on this screen you may view the
Software Version in the upper left corner.
4
After calibration is complete, press the
MODE
MODE button once to save your changes
and return to normal operation.
31
Advertisement
Table of Contents
