User Setup
Table for button
presses that are
required for
entering various
menus
How to Change Settings in the Setup Screens
To enter the setup screens, press the MODE button, and
simultaneously press OVERRIDE button for 5 seconds. Release the
buttons when you see "Setup" on the display. Use the WARMER or
COOLER buttons to adjust the value of your selection. Press MODE to
advance to the next setup step. Press MODE and OVERRIDE together
again to leave the setup screens.
MODE
OVERRIDE
press together for
5 seconds
TO ENTER MENUS BUTTON PRESS
Setup Steps
Time Schedule
Emergency Heat
Lockout Buttons
Calibration
Wireless Setup
MODE & OVERRIDE for 5 seconds
MODE & UP for 2 seconds
UP & OVERRIDE for 2 seconds
MODE, UP & DOWN for 2 seconds
MODE & DOWN for 2 seconds, then MODE
OVERRIDE for 5 Seconds
17