About Advanced Features & Operation
Emergency Heat
Only available if you have a Heat Pump installed. To initiate the
Emergency Heat feature, press the FAN button. While holding the FAN
button press the UP button for two seconds.
The display will read 'EM HEAT'
(Emergency Heat).
Press for
Emergency Heat
FAN
During Emergency Heat operation the thermostat will turn on the fan
and the Aux strip heat when there is a demand for heat. Also during
Emergency Heat, heatpump operation will be unavailable.
Exit Emergency Heat
Follow the same steps as entering Emergency Heat by pressing the FAN
and UP buttons, for two seconds. During Emergency Heat, only OFF and
HEAT modes are available by pressing the MODE button.
30