Table of Contents
Advertisement
Installer Setup
Skyport Cloud Services
(setup step 26)
If set to ON, the thermostat may
communicate and receive data from
the Skyport Cloud Services.
Local API (setup step 27)
Turning on the local API allows 3rd
party software to interface with the
thermostat such as a home
automation system.
NOTE: It is permissable to enable
both Skyport and the local API at the
same time.
Available Modes (setup step 28)
This setup step may restrict the use
of this thermostat to: Heat only or,
Cool only, or Heat and Cool, or Auto
changeover operation.
Show Clock (setup step 29)
This setup step will allow for
removal of the clock and day of the
week from the display. OFF removes
the time and day from the display.
25
Advertisement
Table of Contents
