Table of Contents
Advertisement
User Setup: Service Filter
These setup steps allow the user to monitor FAN runtimes and program
service alerts. Service alerts appear on the display. If the thermostat is joined
to a Skyport account, then the user may be alerted by Skyport Cloud Services
when to change the filter.
FAN
Press and hold FAN
to clear reset runtime.
Service Filter Runtime
Current Service Filter Runtime Hours (Setup
Step 7) - This counter keeps track of the
number of hours of fan runtime in the Heating
mode, Cooling mode, and in stand alone Fan
operation. Press FAN to reset.
Current Service Filter Calendar Days (Setup
Step 8) - This counter displays the total
number of calendar days that have elapsed
since the counter was reset to help the user
track Fan runtime. Press FAN to reset.
Set Service Filter Runtime Hours (Setup Step
9) - This timer allows the user to specify the
number of hours the fan will run before the
"Replace Filter" alert will be displayed. Press
COOLER continuously until OFF is displayed
to disable this alert.
Set Service Filter Calendar Days (Setup Step
10) - This timer allows the user to specify the
number of calendar days that will elapse
before the "Replace Filter" alert will be
displayed. Press COOLER continuously until
OFF is displayed to disable this feature.
Runtime hours
or days appear in
the clock display.
(Setup Steps 7-10)
19
Advertisement
Table of Contents
