Led Function - Xerox 6110MFP/XN Service Documentation

LED Function

The Status LED on the control panel shows the status of your machine.
See the table below to know your machine's status.
Status" LED
Off
Green On
Blink
Red On
Blink
Description
The machine is off-line.
The machine is in Power Save mode. When data is received, or any button
is pressed, it switches to on-line automatically.
The machine is on-line and can be used.
When the backlight slowly blinks, the machine is receiving data from the
computer.
When the backlight fast blinks, the machine is printing data.
The toner cartridge is totally exhausted. Remove the old toner cartridge
and install a new one.
A paper jam has occurred. To solve the problem.
The front cover is open. Close the front cover.
There is no paper in the tray. Load paper in the tray.
The machine has stopped due to a major error. Check the display message.
A minor error occurs and the machine is waiting an error to be cleared.
Check the display message. When the problem is cleared, the machine
resumes.
The toner cartridge is low. Order a new toner cartridge. You can temporarily
improve print quality by redistributing the toner.