Xerox 6110MFP/XN Service Documentation page 165

Repack Procedure
WARNING: Observe safe working
practices. Click Warnings/Cautions for
Safety button on Repairs and Adjustments
menu if unsure about safe working
practices.
CAUTION: The purpose of Repack is to
prevent toner from migrating throughout
the machine during the return shipment to
a service center.
1. Remove the Waste Toner Cartridge.
2. Remove the Waste Toner Retainer Cap
from the storage position and install the
cap on the return port. Secure the
Waste Toner Cartridge into the top of
the machine for shipping.
3. Remove the toner cartridges and install
the clear plastic shipping cover
(shipping cover is installed on all new
cartridges). Secure the Cartridges into
the output tray or top of the machine for
shipping.
4. Close the Toner Ports by installing the
Shipping Plugs into the Toner Ports. If
the plugs are not available close the
ports with tape, or wadded tissue or
wadded paper.